Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateFast, Reliable Garage Door Spring Repair Across Boulder
If your garage door won’t lift, bangs once and stops, or feels far heavier than it used to, the torsion or extension spring has likely failed. That’s a job for trained hands, not a weekend attempt. If you’re in Boulder and need someone who understands what the city’s older garages actually contain, call (888) 574-5680. Our technicians have up to 15 years of experience, we work on your brand, and the price is quoted and agreed before any work starts. We answer 24/7. Fast dispatch from 7am to 7pm.
Why Boulder Homeowners Call Longmont Garage Door Repair Pros for Garage Door Spring Repair
Boulder’s garage doors aren’t typical stock. Carriage-house and wood doors, custom finishes, quiet openers tied into a home automation system. Springs on these doors have to match the door’s actual weight and cycle count, not a box on a shelf. We treat garage door spring repair as its own specialty, not something bolted onto a general handyman’s list.
We’re certified to service eight major brands, including LiftMaster and Chamberlain for smart-opener systems and Clopay and Amarr for the door itself, so a technician arrives ready for the actual make and model. Boulder customers call us back because the diagnosis is right the first time: springs, cables, and balance checked together, not patched one at a time. Anyone in Boulder with a door that won’t move can reach us at (888) 574-5680 and get a free estimate.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Our Garage Door Spring Repair Services in Boulder
Torsion Spring Replacement
A torsion spring lives on a shaft above the door, wound tight, and it carries the full weight of the door. On many Boulder homes, especially mid-century ranch and bungalow garages, that assembly is original and out of production, which often means custom-fitting a replacement rather than swapping in a stock part. We measure wire gauge, inside diameter, and wound length against the surviving spring so the new one matches the door’s real weight.
Extension Spring Replacement
Extension springs run along the sides of the track and stretch as the door closes. Older Boulder garages often have them without a safety cable, which is a genuine hazard if one lets go. We replace matched pairs and add proper containment so a failure stays contained rather than becoming a projectile.
Broken Spring Repair
A snapped spring usually announces itself with a sharp crack, and the door stops dead or drops partway. We isolate the failure and check whether the drums, cables, and end bearing plates have taken damage along with the spring. Boulder’s older tilt-up doors frequently need that inspection, because corrosion often hides behind the spring before anything visible breaks.
Spring Adjustment
Sometimes the spring hasn’t broken but the balance is off, and the door drifts down or the opener has to work too hard. We reset tension to spec so the door holds at the halfway point. That protects the opener and gets the door moving the way it should.
If a door is stuck and there’s an immediate security or safety concern, we also offer emergency garage door service. Call (888) 574-5680.
Safety Cable Installation and Spring Inspection
These two ride along with any spring job. Safety cables contain a failed extension spring, and a proper inspection catches worn cables, a frayed drum, or a bearing plate that’s about to give out. Springs are a safety issue, not just a repair, so this isn’t the place to skip a step.
Trusted Brands We Service in Boulder
We’re equipped to service equipment from LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor, so whether your home has a legacy Craftsman opener or a newer LiftMaster or Chamberlain myQ setup, the technician knows the platform and how it interacts with the door. That matters on Boulder’s custom and carriage-house doors, where an opener that isn’t dialed in will fight a heavy door. We don’t stock parts on a truck; we diagnose the make and model, order what the job needs, and get you a fast turnaround on a proper fix. Call (888) 574-5680 for a free estimate.
Common Garage Door Spring Repair Problems We See in Boulder Homes
- Snowmelt corrosion in Table Mesa and Martin Acres. Many detached garages here were built without freeze-thaw detailing, so snowmelt bridges to the slab and rusts the original tilt-up hinges and the drums and end bearing plates from the inside. The spring ends up fighting corrosion it was never designed for.
- Springs failing faster than in Denver or Longmont. Ridge sun and rapid freeze-thaw cycles along the base of the Flatirons stress the spring steel far harder than in milder Front Range towns. Cycles wear out sooner, and a door that felt fine in fall can snap a spring by spring thaw.
- Balance thrown off by panels that flex. Flat-seam metal and wood-frame panels can flex under heavy spring snow load, loading the torsion spring unevenly. Over time that uneven load beats up the spring and the opener.
- Openers straining on a heavy double door. The springs, not the opener, carry 150 to 350 pounds. When a machine is laboring, that usually points to a weak or broken spring, not a bad motor.
One worth building around: a typical job in Boulder. On a mid-century ranch with a single-piece tilt-up door, a homeowner often hears a loud bang, then finds the door half-open and immovable; the original torsion spring has snapped after years of freeze-thaw cycling quietly corroded the drums and end bearing plates. A qualified local pro measures wire gauge, inside diameter, and wound length against the surviving spring, custom-fits a replacement with the right cycles for the door’s weight, and resets cables and balance, often recommending high-cycle springs on a heavy double door that needs fresh safety cables too. And because so many of these older assemblies are out of production, the job can run to an extra order-and-return trip instead of the same-day swap a stock door allows.
See the difference
Before
After
Before
After
Before
AfterPricing for Garage Door Spring Repair in Boulder, CO
Spring repair is priced per spring. A typical spring repair in Boulder runs $180 – $340, and a matched pair is usually replaced together, so a pair costs about twice that. High-cycle springs on a heavy carriage-house or custom door can land at the top of the range, and original out-of-production assemblies that need custom-fitting can push higher. Here’s how the line items usually break down:
| Service | Typical Estimated Range |
|---|---|
| Spring Repair (per spring) | $180 – $340 |
| Cable Repair | $130 – $250 |
| Track Realignment | $120 – $240 |
These are typical estimates, not a final quote. The written estimate sets the price, and it’s free. Call (888) 574-5680 for yours.
We Also Serve Cities Near Boulder
We connect homeowners with vetted local pros across the Boulder area, so if you’re just outside the city in Louisville, Superior, Lafayette, or Erie, we can help there too. The spring problems are often similar, though the pace of new construction shifts the work toward newer doors. Wherever you are around Boulder, call (888) 574-5680 for a free estimate.
Serving Boulder, CO – Our Local Coverage Area
We serve Boulder and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Garage Door Spring Repair in Boulder
Boulder’s position at the base of the Flatirons gives it intense sun and rapid freeze-thaw cycles that stress spring steel harder than the milder weather in Denver or Longmont, so springs wear out sooner. Older garages here add snowmelt corrosion at the drums and bearing plates on top of that cycle fatigue. Call (888) 574-5680 and we’ll take a look at what’s actually going on. Estimates are free.
Yes, in most cases a broken spring on a 1960s tilt-up door can be repaired without replacing the door. The catch is that original torsion assemblies are often out of production, so the fix usually means custom-fitting a spring to your door’s weight and geometry rather than a stock swap. That can add an order-and-return trip. Call (888) 574-5680 to book a free estimate.
For a custom or carriage-house door, a high-cycle spring is usually the better call, because those doors are heavier and get used heavily. High-cycle springs cost more up front but last longer under that weight and cycle count. We’ll match the spring to your door’s actual load and tell you which option fits. Call (888) 574-5680 for an exact quote.
Usually, yes. If the opener is straining, the springs are the first thing to check, since they carry the door’s weight (150 to 350 pounds on a double door) and the opener should only be guiding it. A weak or broken spring puts that load on the motor. Call (888) 574-5680 for a free estimate.
Spring repair in Boulder typically runs $180 – $340 per spring, and a matched pair runs about twice that since both are usually replaced together. That range covers the spring, the labor, and a balance check; it can climb at the top end for high-cycle springs or out-of-production assemblies that need custom-fitting. Call (888) 574-5680 for an exact quote. Estimates are free.
Get Your Boulder Garage Door Working Again
Carriage-house doors, wood panels, quiet openers tied into a smart home, or a 1960s tilt-up that just snapped its original spring: we handle the full job. From opener to panel to spring, we diagnose the actual make and model instead of guessing, and we quote the price before any work starts. Call (888) 574-5680 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Longmont Garage Door Repair Pros.