Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateFast, Reliable Garage Door Installation Across Boulder
If you’re planning a new garage door in Boulder, the first thing worth knowing is that this city rarely takes an off-the-shelf door. Boulder’s detached garages, especially in the older neighborhoods, come with non-standard openings and out-of-production hardware, so most installations here start with a real measurement, not a catalog page. We connect you with local pros who know that difference. They measure your opening, check how the existing door hangs and balances, and price a door that actually fits the structure you have. Call (888) 574-5680 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Why Boulder Homeowners Call Longmont Garage Door Repair Pros for Garage Door Installation
Boulder homeowners call us because the work gets done by independent local professionals who handle the whole job, from measuring the opening to hanging the door and programming the opener. No handing you off to a second contractor halfway through. Our technicians have up to 15 years of experience, and they work on the brands actually installed in Boulder garages: Clopay, Amarr, Chamberlain, Genie, LiftMaster and Raynor among them.
What matters more here than reputation is local knowledge, and that’s where we earn the call. A pro who installs in Boulder regularly knows that a ranch in Martin Acres or a bungalow near the Flatirons foothills often needs custom fabrication, not a standard-size door dropped into a non-standard opening. They know which doors hold up to the freeze-thaw cycle at the base of the Flatirons and which ones start to fail within a couple of winters.
Response across Boulder is straightforward. Installation is scheduled work, so you get a free measure and a written price before anything is ordered. For repair and emergency needs that can’t wait, we offer same-day service where the schedule allows, and our phone line is answered around the clock. Every quote is agreed before work starts, so the written estimate sets the final price.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Our Garage Door Installation Services in Boulder
New Door Installation in Boulder
A full new door in Boulder usually means replacing a tired tilt-up or aging sectional with something built for this climate. We handle the measure, the door selection, the hardware, and the opener in one visit once the door arrives. Most installations on Boulder’s older housing stock need a custom-fit opening measurement, because post-war garages rarely match the sizes in a manufacturer’s catalog.

Single Car Door Installation in Boulder
Single car doors are common on the infill duplexes and accessory dwelling units going up around Boulder, and they fit neatly onto the older single-bay detached garages too. A narrow single door on an old opening often means a custom order. Whatever the width, we match the door, tracks and springs to the actual bay.

Double Car Door Installation in Boulder
Double car doors are the usual choice for the mid-century ranches that make up much of Boulder’s housing stock, but the wider span puts more load on the springs and tracks. That’s why we size the torsion system to the door weight rather than reusing the old hardware. A properly matched double door runs quietly and stays balanced for years.

Custom Garage Door Installation in Boulder
Custom is where most of our Boulder installation work lives. Design review standards in the city mean a replacement door often has to keep the original flat-panel profile, and the out-of-production hardware on older garages has to be custom-fit. Carriage-house styles and wood doors that match the character of a Boulder home are a big part of what we quote here. If you need wood doors built to a specific look, that’s the kind of job we take on.
Trusted Brands We Service in Boulder
We work on the brands that fill Boulder’s garages: LiftMaster and Chamberlain openers, Clopay and Amarr doors, Genie and Wayne Dalton systems, plus the older Craftsman and Raynor equipment still running in post-war bungalows. Our technicians diagnose the actual make and model rather than guessing, which matters when a custom door needs a matching opener or a legacy system needs a modern replacement. We don’t carry parts on a truck; the local pro orders what your specific door needs and schedules the install once it’s in. If you want to see the full range of what we handle, our garage door installation team covers the whole job from measurement to final adjustment.
Common Garage Door Installation Problems We See in Boulder Homes
- Rusted hinges on original tilt-up doors. In ranches around Table Mesa and Martin Acres, snowmelt bridges onto the garage slab and eats the steel hinges from the inside out. The door seizes rather than rolls, and the fix is usually a modern sectional replacement in the original flat-panel profile.
- Non-standard openings and out-of-production springs. Post-war bungalows across Boulder have door openings that don’t match any standard size, and their torsion-spring assemblies are often out of production. That means custom fabrication and matched hardware, not an off-the-shelf swap.
- Weather seals and panels stressed by Flatirons freeze-thaw. Rapid temperature swings and heavy spring snow loads wear out seals and panel edges faster here than in milder Front Range towns. A new door with a good perimeter seal and insulated panels handles the cycle better.
- Design-review mismatches. A replacement door that looks fine on paper can still fail city design-review if it strays from the neighborhood profile. We check the profile before ordering so you don’t end up with a door that has to be swapped out.
Pricing for Garage Door Installation in Boulder, CO
New door installation in Boulder typically runs $700 – $2200 as an estimated range, and the final price depends on the door style, the size of the opening, and whether the job needs custom fabrication. A standard single sectional door usually lands toward the lower end; a custom wood or carriage-house door built for a non-standard opening sits toward the upper end. The estimate is free and the price is agreed before any work starts, so the written quote sets the final price.
| Line item | Typical estimated range |
|---|---|
| New door installation | $700 – $2200 |
| Opener installation | $250 – $550 |
| Spring repair (one spring) | $180 – $340 |
| Cable repair | $130 – $250 |
| Panel replacement | $250 – $500 |
| Track realignment | $120 – $240 |
Because so much of the work here is custom-fit, the door and hardware order often drives the total more than the labor. Call (888) 574-5680 for an exact quote; estimates are free.
See the difference
Before
After
Before
After
Before
AfterWhy Boulder Installations Skew Custom-Fit
Boulder’s detached garages sit right on the freeze-thaw line at the base of the Flatirons, and in the ranches around Table Mesa and Martin Acres the original 1960s tilt-up doors rust from the inside out where snowmelt bridges onto the slab. So a replacement request in those neighborhoods is usually for a modern sectional door in the original flat-panel profile, so it passes the city’s design-review standards. That combination of design-reviewed profiles plus out-of-production hardware is exactly why custom-fit, not off-the-shelf, drives most of the installation work in Boulder.
A typical job on a mid-century ranch with a detached garage starts with a door that binds halfway, or an opener that labors and reverses. The cause is often a corroded original tilt-up hinge, worn drums, or a tired torsion spring rather than the opener itself. A qualified local pro measures the non-standard opening, checks door balance, spring cycles and track alignment, and either rebuilds the hardware with a matched high-cycle torsion spring and new cables, or fits a sectional door in the original flat-panel style. Insulated, high-R-value panels and a quiet belt-drive opener with photo-eye sensors are common retrofit upgrades on these older garages. Boulder’s push toward energy efficiency means many of these installations are part of a whole-home retrofit rather than a stand-alone replacement, which is a bigger share of the work here than in nearby towns.
Safety Comes With the Job
Garage doors run on high-tension springs and cables that can cause serious injury if handled without training. We don’t give step-by-step DIY instructions for spring or cable work, and we won’t talk you into trying it. A trained technician does that part. If your door is hanging, springing loose or stuck halfway, keep clear of the moving parts and have it looked at.
We Also Serve Cities Near Boulder
The same installation work reaches homeowners in Louisville, Superior, Lafayette and Erie, where the housing stock overlaps with Boulder and the climate is much the same. If you’re just outside city limits and need a measure and a written price, we can connect you with a local pro nearby.
Serving Boulder, CO – Our Local Coverage Area
We serve Boulder and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Garage Door Installation in Boulder
Because much of Boulder’s housing is post-war bungalow and mid-century ranch stock with non-standard openings and out-of-production hardware. A standard-size door won’t fit an opening that was never built to a catalog dimension, so most of these jobs need a custom measurement and order. Call (888) 574-5680 for a free measure.
Yes. A modern sectional door can be ordered in the original flat-panel profile, which is exactly why so many replacements around Table Mesa and Martin Acres go that route. It keeps the neighborhood character while giving you a door that rolls instead of seizing. The city’s design-review standards are checked before ordering.
The right R-value depends on whether your garage is attached and how the space is used, so there’s no single number for every home. We talk through insulated panel options with you during the measure and match the door to your home’s setup. A local pro can explain the trade-off between cost and insulation for your specific garage.
Because the cause is usually the door hardware, not the opener: a corroded tilt-up hinge, worn drums, or a tired torsion spring. The opener is doing extra work to move a door that isn’t balanced. A pro checks door balance, spring cycles and track alignment first, then decides whether the opener needs replacing too.
High-cycle springs are the safer choice on a Boulder garage that opens often, since the freeze-thaw cycle here works the hardware harder than a milder climate. They cost more up front but last longer between replacements. Ask your pro to match the spring to your door weight and the cycles you actually use.
Ready for a New Garage Door in Boulder?
Whether you’re replacing a rusted tilt-up in Martin Acres or ordering a custom wood door for a remodel, the first step is a free measure and a written price. Call (888) 574-5680 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. The price is agreed before any work starts.
Written by the team at Longmont Garage Door Repair Pros.