Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Panel Replacement Cost in Longmont?
Panel replacement in Longmont typically costs $250 – $500 for a single section, including the panel, hardware transfer and adjustment of the door to sit and travel correctly again. That range covers most residential doors we see around Longmont, from Clopay and Amarr sections on newer builds to Wayne Dalton panels on older doors. The written estimate sets the final price, and the estimate itself is free.
A dented or cracked section is worth pricing before you replace the whole door. Most of the time one or two panels can be swapped for a fraction of new-door money, and the door keeps its original opener, springs and track. We work on the make and model you actually have, so a section match isn’t a guessing game. Call (888) 574-5680 and we’ll talk through what you’re looking at. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Panel Replacement Cost Breakdown (2026)
Here’s how the line items usually stack up for a residential panel job in the Longmont market. Ranges are typical estimates, not quotes. The written estimate is what you pay.
| Line item | Typical estimated range |
|---|---|
| Single panel replacement (standard steel, labor included) | $250 – $500 |
| Two-panel replacement on the same door | Roughly double the single-panel range |
| Cable repair, if a cable is frayed or off the drum | $130 – $250 |
| Track realignment, when a bent track caused the damage | $120 – $240 |
| Roller replacement, if rollers are worn or seized | $110 – $220 |
| Spring repair, one spring (a matched pair usually runs about twice this) | $180 – $340 |
| Opener repair, if the opener was damaged in the same event | $120 – $320 |
| Full garage door repair, when several parts are involved | $150 – $600 |
| New door installation, if the door is past patching | $700 – $2200 |
What pushes a panel job up: the panel profile itself. A basic raised-panel steel section in a common color is at the low end. A long-panel or carriage-house style section, a window insert, or a color that has to be ordered runs higher. So does a door where the impact bent the track or stretched a cable, because that’s a second repair on top of the panel. What keeps it down: catching a dent before it turns into rust, and replacing the panel before a bent section starts dragging on the rest of the door.
What Affects Panel Replacement Pricing in Longmont
- Panel type and profile. Standard raised-panel steel is the cheapest section to match. Long-panel, carriage-house and window-insert sections cost more, and some profiles only come from the original manufacturer, which adds lead time.
- Whether it’s one panel or two. Two damaged sections on the same door means paying for two panels plus the labor to re-hang and re-balance. A matched pair of adjacent panels is common when something hits the door low and wide.
- Brand and model match. We service LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman and Raynor, so we can identify what you have and order a section that fits the existing door rather than talk you into a full replacement. Mismatched panels show at the seams, and a section that doesn’t match the door’s weight changes how the springs carry it.
- Hidden damage behind the panel. A hit hard enough to crease a section often bends a hinge, pops a roller out of the track, or knocks the door out of alignment. That’s where a $250 panel turns into a $500 job, and it’s worth knowing before the work starts rather than after.
- Longmont’s freeze-thaw cycle. Doors here live through big temperature swings between winter and summer, and that movement works on hinges, rollers and track fasteners. A panel that sits slightly out of line in January can rub all summer. When the panel comes off, it’s the right moment to check the hardware it mounts to.
- Hail and wind exposure along the Front Range. Storm damage is one of the most common reasons a panel gets replaced around Longmont. If the dent came from a storm, look at the rest of the door before authorizing just one section, since a second impact is often hiding under the same shadow line.
How Does the Job Actually Go?
A panel replacement is a same-visit job in most cases. The technician identifies the door’s make and model, confirms the section will match, unloads the springs to take tension off the door, then removes the damaged panel and transfers the hinges and hardware onto the new one. After that the door gets re-hung, the springs come back up, and the travel and balance are checked so the opener doesn’t have to fight a door that sits crooked.
Two things can change that plan. If the section isn’t a stock profile, it has to be ordered, and the door waits. And if the impact bent the track or damaged a cable, that gets fixed in the same visit rather than leaving you with a straight panel on a crooked frame. We’d rather do the whole job once than have you call back in a month. That full-range capability – panel, track, cable, springs, opener – is why homeowners don’t get handed off to a second contractor halfway through. You can read more about how we handle panel replacement if you want the service detail.
A word on safety: garage door springs and cables are under high tension, and a door that’s out of balance can come down hard. Panel work means releasing and re-tensioning that system. This isn’t a job to take on with a ladder and a socket set. A trained technician does it with the right winding bars and the door properly secured.
Repair or Replace: Which Makes Sense?
One damaged panel on an otherwise sound door is almost always worth replacing. A door with two or three bad sections, rust working along the bottom edge, and springs near the end of their life is usually a replacement conversation. The math is simple: a new door installation in Longmont runs $700 – $2200, so if the panel work plus follow-on repairs is closing in on that, replacement starts to make more sense.
We’ll tell you which side of that line you’re on. If a panel gets you another decade out of the door, that’s the answer. If it doesn’t, we’ll say so instead of selling you sections one at a time.
How to Save on Panel Replacement
- Get the estimate in writing before work starts. The written estimate sets the price, so there are no surprises when the door comes apart and a hinge turns out to be bent.
- Fix the cause, not just the dent. If a bent track is what slammed the door into the frame, replacing the panel without straightening the track means the new section takes the same hit.
- Ask about matching a single section first. If your door’s profile is still made, one section is far cheaper than a full door. Don’t assume you need a new door until someone has checked the model.
- Deal with rust early. A small rust spot along the bottom edge of a steel panel spreads once water gets behind the paint. Catching it while it’s small keeps you in single-panel territory.
- Bundle related work into one visit. If the rollers are seized or a cable is frayed, doing it in the same visit as the panel saves you a second service call. The estimate is free either way.
Call (888) 574-5680 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. If a panel has come loose and the door won’t close, that’s an emergency situation – a door that won’t shut leaves the garage open – and emergency garage door service is something we handle.
FAQs – Panel Replacement Cost
How much does one garage door panel cost in Longmont?
One panel typically runs $250 – $500 installed in the Longmont market, with the panel, hardware transfer and door adjustment included. Two sections on the same door usually come in around double that. Call (888) 574-5680 for an exact quote on your door – estimates are free.
Is it cheaper to replace a panel or the whole door?
Replacing a panel is nearly always cheaper when the rest of the door is sound. A single panel runs $250 – $500, while a new door installation runs $700 – $2200. The crossover point is when two or three sections are damaged and the springs and hardware are also due. Call (888) 574-5680 and we’ll tell you which side of that line your door is on.
Can you match my door’s brand and panel style?
In most cases, yes. We service LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman and Raynor, so we identify the make and model first and then order a section that fits. Some older profiles are discontinued, and in that case we’ll tell you what the alternatives are rather than sell you something that won’t line up. Call (888) 574-5680 to check your model – estimates are free.
How long does a panel replacement take?
A single-panel replacement is usually a same-visit job, done in a couple of hours once the section is on hand. The wildcard is ordering: a stock profile can be lined up quickly, while a special-order section adds lead time. Call (888) 574-5680 and we’ll give you a realistic timeline for your door.
Does storm or hail damage change the price?
No – panel pricing is the same $250 – $500 range whether the dent came from hail, a stray basketball or a backing mishap. What can change the total is hidden damage: a bent track, a popped roller or a stretched cable found during the job. Call (888) 574-5680 for a free estimate before anything is ordered.
Can a damaged panel be repaired instead of replaced?
Sometimes. A small dent that hasn’t broken the paint or creased the section can often be left alone or worked out. A cracked, rusted or badly creased panel gets replaced, because a section that’s lost its shape drags on the tracks and loads the springs unevenly. Call (888) 574-5680 and we’ll give you a straight answer on yours.
Why Homeowners Around Longmont Call Us
Panel work sits inside a bigger picture. A door that took a hit is a door whose springs, cables, track and opener all took some of that energy too. We handle repair, opener repair, spring repair and full installation, so the same conversation covers the whole door. No second contractor, no gap between one part of the job and the next.
Our technicians have up to 15 years of experience, and they diagnose the actual make and model in front of them rather than guessing from a photo. The local pro who comes out is licensed and insured as Colorado requires. Pricing is upfront, the estimate is free, and the written estimate is what you pay.
Start at Longmont Garage Door Repair Pros to see the full service list, or call and describe the damage. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We’re closed Saturday, and a call outside dispatch hours gets booked into the next opening.
Contact Us for a Free Panel Replacement Estimate
If a panel is dented, cracked or hanging loose, don’t wait for it to take the rest of the door with it. Call (888) 574-5680 for a free estimate on panel replacement in Longmont. We’ll identify your door, quote the section in writing, and get it fixed. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the Longmont market as of 2026. Longmont Garage Door Repair Pros offers free estimates – call (888) 574-5680.
Written by the team at Longmont Garage Door Repair Pros.
What Our Customers Say
"Good repair, reasonable money. The door still has a slight shudder about a foot from the top that he said is the track being slightly out of true on an old frame and would cost real money to fix properly. Fair enough, but I'd hoped it would be perfect."
- Brooke Parker"Logic board on a 15 year old opener. He was upfront that a new opener would cost less than the board plus labor, and he wasn't wrong. No pressure either way."
- Bryce Whitaker"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
- Tim Gallagher