Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in Longmont?
Spring replacement in Longmont typically costs $180 – $340 for one spring, and that’s the range we quote most often in 2026. A matched pair is usually replaced together because the springs wear as a set, so a pair runs about twice that: roughly $360 – $680. The written estimate sets the final price, and the estimate itself is free.
We answer 24/7 and run fast dispatch from 7am to 7pm, Sunday through Friday, so a door that won’t lift can be looked at the same day in most cases. If you’d rather talk it through, call (888) 574-5680 and we’ll walk you through what a spring job on your door usually involves.
Key Takeaways
- One spring: $180 – $340. A matched pair: about twice that, $360 – $680.
- Torsion and extension springs are priced the same way, per spring, not per door.
- Spring work is dangerous. High-tension springs and cables can cause serious injury, and trained handling matters.
- Most broken springs are diagnosed and replaced on the same visit once the door has been checked.
- Estimates are free and written. Call (888) 574-5680.
Spring Replacement Cost Breakdown (2026)
Here’s how the numbers break down for a typical Longmont spring job. These are estimated ranges, not exact prices, and the written estimate is what sets your final cost.
| Line item | Typical estimated range |
|---|---|
| One spring replacement (torsion or extension) | $180 – $340 |
| Matched pair of springs (both replaced together) | $360 – $680 |
| Cable repair, when cables are frayed or snapped alongside a spring | $130 – $250 |
| Roller replacement, often bundled when the door is already apart | $110 – $220 |
| Track realignment, if the door fell or shifted after a spring failure | $120 – $240 |
| Panel replacement, if a broken spring dropped the door on a panel | $250 – $500 |
| General garage door repair (spring job plus smaller fixes) | $150 – $600 |
| Opener repair, if the opener keeps trying to lift a dead door | $120 – $320 |
| Opener installation, if the motor is worn out and the door needs a new operator | $250 – $550 |
| New door installation, if the door itself is beyond repair | $700 – $2,200 |
What pushes a spring job toward the top of the range? The spring type, the door’s weight, and whether the failure took anything else with it. A single torsion spring that’s the only problem sits at the low end. A door with a matched pair plus frayed cables and a knocked-out panel lands at the high end, because you’re paying for the spring job and a few related parts on the same visit. We work on the whole door in one stop rather than fixing the spring and leaving the rest, so you’re not calling a second outfit next week.
Brand matters less than people expect, but it does come up. We’re certified to service LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor doors and openers, so a Clopay panel door with a broken spring and a Chamberlain opener that’s been straining gets diagnosed as one system. That’s what “same visit, full fix” means in practice.
What Affects Spring Replacement Pricing in Longmont
Longmont sits on the Front Range, where the swing between dry summer heat and hard winter cold puts real stress on steel springs. Springs cycle every time the door opens and closes, and temperature swings shorten their life a little faster than a mild climate would. Beyond that, a handful of things move the price:
- One spring or a matched pair. Torsion systems usually run two springs, and they’re replaced together because a fresh spring paired with an old one just breaks the old one faster. Two springs cost about twice one spring, and that’s the single biggest factor.
- Spring type and size. A torsion spring on a standard single-car door is a different size and wire gauge than the pair on a wide two-car door. Heavier doors take heavier springs, so a double-wide door in older Longmont housing often prices higher than a single bay.
- Condition of the cables. A snapped spring often slacks the cables, and a frayed or kinked cable gets replaced while the door’s apart. That’s the $130 – $250 cable line, and skipping it just means a call-back later.
- Door damage after the failure. If a spring lets go while the door is up, the door can drop hard and bend a panel or knock a track out of line. Panel replacement runs $250 – $500 and track realignment $120 – $240, using the ranges above.
- Access and door height. An eight-foot door or a low-clearance setup takes a bit more time to work around than a standard seven-foot door. It’s a smaller factor, but it’s real.
- Whether the opener was damaged too. An opener that kept forcing a stuck door can burn out its gear or motor. If that happened, an opener repair ($120 – $320) or a new operator ($250 – $550) gets added to the job.
The good news is that spring pricing is fairly predictable. Unlike a repair where the cause is unknown until someone looks, a broken spring is visible and the cost is mostly about which springs you need and how many. That’s why we can usually give you a real number on the phone, and a firm one after the door’s been checked.
How to Save on Spring Replacement
You can’t really “save” your way out of a broken spring, but you can avoid paying for things you don’t need and for problems that a small fix now would have prevented.
- Book the estimate first. Estimates are free, so there’s no reason to agree to a number over the phone from anyone. Call (888) 574-5680 and we’ll send a technician to look at the door and write it up.
- Replace the pair together. Paying for two springs now is cheaper than paying for one now and one in a year, because you avoid a second service visit.
- Fix cables and rollers while the door is open. If a cable or rollers are already worn, doing it during the spring job is typically less than coming back for them separately.
- Get the opener checked. An opener that’s been fighting a dead door is a cheap repair if you catch it now and an expensive replacement if you wait. We handle LiftMaster and Chamberlain openers in the same visit.
- Don’t put off a noisy or slow door. A door that’s getting harder to lift is often showing early spring wear. A quick look now beats a snapped spring later.
One thing worth saying plainly: springs are a safety issue, not just a repair. A wound torsion spring holds a lot of stored tension, and handling one without the right tools and training can cause serious injury. That’s not a job to take on yourself, and a technician who tells you otherwise is doing you a disservice. We’d rather answer your questions and let a trained technician handle the tension. If you want the full picture of how we approach these jobs, our spring replacement page covers what a technician actually checks on a Longmont door.
How Long Does Spring Replacement Take?
A single spring is usually replaced in well under an hour, and a matched pair takes a bit longer. Most spring jobs are finished on a single visit. What extends the visit is anything the failure brought down with it: a bent track, a cracked panel, or an opener that needs repair. We diagnose the whole door while we’re there so you’re not scheduling a second appointment for something we could see on the first one.
For a homeowner whose car is trapped inside, the timeline matters. If you call and the door’s stuck, we’ll tell you what the schedule looks like. We answer 24/7, and dispatch runs from 7am to 7pm, Sunday through Friday. A call outside those hours gets booked into the next opening.
Can You Replace Springs the Same Day?
In most cases, yes. Spring replacement is a core service for us, not a side job, and the parts for a standard residential door are common enough that same-day work is routine. We carry the expertise for the eight major brands people actually own in Longmont, so there’s no “we’ll have to order that” detour for a LiftMaster opener, a Clopay door, or a Wayne Dalton panel.
The exception is an unusual spring size or a door that needs something special. In that case we’ll tell you up front, and the estimate will reflect the actual job. If the door is stuck and it’s a security or safety concern, treat it as an emergency and call (888) 574-5680. Emergency garage door service is something we offer, and we’d rather hear from you with a car in the driveway than take chances with a door that’s half up.
Should You Repair the Spring or Replace the Door?
For a door that’s structurally sound, replacing the spring is almost always the answer. A new spring on a solid door solves the problem for far less than a new door would, and the rest of the door usually has plenty of life left. Full replacement ($700 – $2,200) makes more sense when the panels are badly damaged, the frame is rotting, or the door has failed in several ways at once.
A responsible technician will tell you which situation you’re in, and we don’t push a new door when a spring will fix it. When the door really is at the end of its life, our Longmont Garage Door Repair Pros team can talk you through what a replacement involves and what it would cost. In between, a door that just needs a panel or track fix is a repair at the $120 – $500 ranges above, not a full replacement.
Why Brand and Model Matter for the Price
It’s not that branded parts cost more, it’s that the right spring size depends on the door it’s holding. A Craftsman opener on a Raynor door from an older Longmont home is a different setup than a modern LiftMaster or Chamberlain system on a newer build. Knowing the make and model means we bring the right spring and the right parts the first time. We’re certified on LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor, which covers most of what’s installed in this area. That’s why our technicians can handle the diagnosis on the visit rather than guessing and ordering.
Our technicians have up to 15 years of experience working on springs, openers, and doors across these brands. That matters most when a failure looks like a spring but turns out to be a cable or a worn roller, and getting the diagnosis right is what keeps the job to one visit.
FAQs – Spring Replacement Cost
How much does it cost to replace a garage door spring in Longmont?
Replacing one spring in Longmont typically costs $180 – $340. A matched pair, which is what most torsion systems use, runs about twice that, or $360 – $680, since the springs are replaced together. The written estimate sets the final price, and estimates are free. Call (888) 574-5680 for an exact quote.
Is it cheaper to replace one spring or both?
Replacing both springs at once usually costs less overall than replacing them one at a time. One spring is $180 – $340, and a pair is about double, but the pair avoids a second service visit when the other spring fails later, which is common because the springs wear together. So the pair is the better value in practice. Call (888) 574-5680 to talk through which makes sense for your door.
Can you come today for a broken spring?
Same-day spring replacement is routine for us, and a broken spring is one of the most urgent things we handle. Call (888) 574-5680 and we’ll get a technician out. We answer 24/7, and fast dispatch runs 7am to 7pm, Sunday through Friday.
Does the price go up if it’s an emergency?
No. The price is set per job by the written estimate, and the range for the spring itself doesn’t change because it’s urgent. What changes is how quickly we get to you. Emergency garage door service is a real part of what we offer, so a stuck door with a car locked inside gets treated as a call worth making. Call (888) 574-5680.
What if my door needs more than just the spring?
Related repairs are priced at $120 – $500 depending on what’s involved: cables at $130 – $250, rollers at $110 – $220, a track realignment at $120 – $240, or a panel at $250 – $500. We diagnose everything on the visit so you get one written estimate instead of two separate appointments. Call (888) 574-5680 for a free estimate.
What Happens When You Call
You’ll talk to a real person who knows garage doors, not a call center reading a script. We’ll ask about the door, its brand, and what it’s doing, and we’ll book a technician with dispatch running from 7am to 7pm, Sunday through Friday. We answer 24/7, so if you’re calling outside those hours, you’ll be booked into the next opening. Estimates are free, the price is set in writing, and our technicians have up to 15 years of experience on the brands you actually own.
For a door that’s stuck, half-open, or sitting with a car trapped underneath it, don’t wait on a spring you can’t see failing. Call (888) 574-5680 for a free estimate and we’ll get someone out to look at it.
Get a Free Spring Replacement Estimate in Longmont
If your spring has snapped or your door is getting hard to lift, the fastest way to a real number is to call. We’ll send a technician to inspect the door, tell you what’s actually wrong, and give you a written estimate before any work starts. We work on the full range of residential doors and openers, from older Raynor and Craftsman systems to modern LiftMaster and Chamberlain smart openers, so your brand won’t be a surprise on the visit.
Call (888) 574-5680 for a free estimate. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday.
Pricing reflects the Longmont market as of 2026. Longmont Garage Door Repair Pros offers free estimates – call (888) 574-5680.
Written by the team at Longmont Garage Door Repair Pros.
What Our Customers Say
"Good repair, reasonable money. The door still has a slight shudder about a foot from the top that he said is the track being slightly out of true on an old frame and would cost real money to fix properly. Fair enough, but I'd hoped it would be perfect."
- Brooke Parker"Logic board on a 15 year old opener. He was upfront that a new opener would cost less than the board plus labor, and he wasn't wrong. No pressure either way."
- Bryce Whitaker"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
- Tim Gallagher